• FREE Shipping on AlphaRex Products!
The Sleek and Modern Look: How to Change the Silver Horse Logo on Your 2021 and Newer Ford Bronco to Matte Black

Blogs

The Sleek and Modern Look: How to Change the Silver Horse Logo on Your 2021 and Newer Ford Bronco to Matte Black

Previous

The Sleek and Modern Look: How to Change the Silver Horse Logo on Your 2021 and Newer Ford Bronco to Matte Black

Next

The 2021 and newer Ford Bronco is a sleek and modern-looking vehicle that has received a lot of attention and praise for its design. However, some customers have expressed the desire to change the silver horse logo on the tailgate to one that is matte black. Not only does it give a more unified look, but it also complements the overall appearance of the truck. The good news is that changing the logo is an easy process that can be done in just a few simple steps. In this blog post, we will guide you through the installation process to help you achieve that desired matte black look.

Step 1: Trace the Logo

Use masking tape to trace the factory emblem. Make sure you're lining it up perfectly - don't want a lopsided horse. Trace all four sides with the masking tape and making sure the edge of the tape touches two points on the horse.

Step 2: Removing the Existing Logo

Use a heat gun or hair dryer to heat up the logo. Heating up the logo will allow the adhesive underneath the logo to be removed. Heat the logo for about one minute. Using a plastic pry tool, you will work your way around the logo. The logo should start to lift up until the logo is completely off.

Step 2: Prepping for the New Logo

Before installing the new matte black logo, it is essential to clean the area where the old logo was removed thoroughly. Use a microfiber towel or cloth and a mild cleaning solution to wipe off any oil or debris. 

Step 3: Attaching the New Logo

Now it is time to install the new matte black logo. Start by aligning the logo with the masking tape template you made. Once you have lined up the logo to the factory position you can then apply to the paint. 

Step 4: Finishing up the Installation

Apply pressure to the new logo for 10-15 seconds and remove the masking tape. Now that you’ve installed the new matte black logo, it’s time to step back and admire your handiwork. Congratulations, you have successfully completed the installation process!

In conclusion, changing the silver horse logo on your 2021 and newer Ford Bronco to matte black is an easy process that can be done in just a few simple steps. With the right tools and accurate steps and help, you can achieve the desired sleek and modern look for your truck. The new matte black logo complements the overall appearance of the truck, giving it a more unified look. With little effort, you can make a big visual difference in your truck's look. 

Find the Bronco emblem here ->

Install Video:

 

By Tuan Vo
Comments
0 Comments